retatrutide-20mg-cutout-v9

Reta Reconstitution Calculator: How Much BAC Water

Weight Loss Research

A 10 mg vial of reta reconstituted with 2 mL of bacteriostatic water (BAC water) gives a concentration of 5 mg/mL; with 1 mL it gives 10 mg/mL. The 20 mg vial gives 10 mg/mL with 2 mL and 5 mg/mL with 4 mL, and the 30 mg vial gives 10 mg/mL with 3 mL. Reta is the short name for retatrutide, sold by Vistara Labs as Retatrutide (GLP-3). The calculation depends only on the quantity of peptide in the vial and the volume of water added, so every vial size shares the same figures once the concentration matches. The reta calculator preset does the arithmetic for you.

Peptide reconstitution calculator

Set to this vial below. Change the vial size, water volume, amount or syringe and it recalculates the concentration and the syringe units. For laboratory research use only.

1 mg = 1000 mcg
As printed on the vial
Total volume you put in the vial
Draw to 5.0units
Syringe fill diagram

Concentration—
Volume per dose—
Doses per vial—

    All products are sold strictly for laboratory research use only and are not for human or veterinary consumption. This calculator is provided as a general reference tool.

    There is no single correct volume of BAC water for reta. Adding more water does not change how much peptide is in the vial. It spreads the same quantity through a larger volume, which changes how many syringe units correspond to a given mass. The tables on this page use 2 mL for the 10 mg vial because it produces round numbers on a U-100 syringe; 1 mL, 3 mL or 5 mL work identically as long as the resulting concentration is written on the vial.

    Retatrutide (GLP-3)View product →

    Reta concentration by BAC water volume

    Concentration is peptide mass divided by water volume. A 10 mg vial holds 10 mg whether it receives 1 mL or 5 mL; only the mg/mL figure moves. The right-hand column converts each concentration into the number of U-100 units that contain 1 mg.

    Reta vial and BAC waterConcentrationUnits containing 1 mg
    10 mg + 1 mL10 mg/mL10 units
    10 mg + 2 mL5 mg/mL20 units
    10 mg + 3 mL3.33 mg/mL30 units
    10 mg + 5 mL2 mg/mL50 units
    20 mg + 1 mL20 mg/mL5 units
    20 mg + 2 mL10 mg/mL10 units
    20 mg + 3 mL6.67 mg/mL15 units
    20 mg + 4 mL5 mg/mL20 units
    30 mg + 2 mL15 mg/mL6.67 units
    30 mg + 3 mL10 mg/mL10 units

    Before choosing a larger volume, check that the peptide vial has headspace for it. One multi-dose vial of bacteriostatic water covers several research vials.

    Reading reta concentration on a U-100 syringe

    A U-100 insulin syringe is graduated in units, and 100 units equal 1 mL. Units are therefore millilitres multiplied by 100: 0.1 mL is 10 units and 0.25 mL is 25 units. A 0.5 mL syringe carries 50 units and a 0.3 mL syringe carries 30 units on the same scale, with finer markings that make small volumes easier to read.

    To find the volume that contains a given mass, divide the mass by the concentration. At 5 mg/mL (a 10 mg vial with 2 mL of water), the volume that contains 1 mg is 1 divided by 5, which is 0.2 mL, or 20 units. The table below runs the same calculation for four arbitrary amounts. They illustrate the arithmetic and nothing else.

    Mass (illustrative)Volume at 5 mg/mLU-100 units
    0.25 mg0.05 mL5 units
    0.5 mg0.1 mL10 units
    1 mg0.2 mL20 units
    2 mg0.4 mL40 units

    At 10 mg/mL, which is what the 20 mg vial gives with 2 mL of water or the 30 mg vial with 3 mL, every volume in the table halves: 1 mg measures 10 units and 0.5 mg measures 5 units. Volumes below about 0.1 mL are hard to read accurately on a 1 mL syringe. Either move to a 0.3 mL or 0.5 mL syringe, or reconstitute with more water so that the same mass occupies a larger, more legible volume.

    Reta (GLP-3) is supplied by Vistara Labs as a lyophilised material for laboratory research use. The quantities on this page illustrate the arithmetic of dilution and measurement only.

    The reta 10 mg, 20 mg and 30 mg vials

    Reta is a 39-amino-acid synthetic peptide. Vistara Labs supplies it in 10 mg, 20 mg and 30 mg vials; the mass on the label is the lyophilised peptide in the vial, and the tables above treat it as one quantity. A 20 mg vial reconstituted with 4 mL of water is indistinguishable, in concentration, from a 10 mg vial reconstituted with 2 mL: both are 5 mg/mL, so a given mass occupies the same number of units from either. Certificates of analysis are on the lab reports page.

    Reta is a single peptide that activates three receptors, GIP, GLP-1 and glucagon, which is why it is described as a triple agonist and nicknamed GLP-3; tirzepatide acts on two of the three. It carries a fatty-acid side chain that binds albumin in the blood, which gives it a half-life of about six days in the published trials. The side chain changes nothing in the arithmetic above. The trial record is covered in reta side effects: what the trials reported and reta vs tirzepatide.

    Reta reconstitution technique

    Let the vial reach room temperature, swab both stoppers, and run the measured water slowly down the inside wall of the vial rather than onto the powder. Swirl or tilt gently until the cake dissolves, never shake, and give any remaining powder a few minutes to settle into solution. Label the vial with the date and the concentration, then keep it refrigerated at 2 to 8 °C and protected from light. The full method, with the reason behind each step, is in how to reconstitute peptides with bacteriostatic water, and storage windows are in how long does reta last.

    Why reconstituted reta should look clear

    Properly reconstituted reta forms a clear, colourless solution. Cloudiness, strands or a gel that will not disperse usually mean the water went in too fast or the vial was shaken; haze that appears later points to warm or bright storage. The causes are covered in why peptides gel or go cloudy.

    BAC water, not sterile water

    Bacteriostatic water is sterile water with 0.9% benzyl alcohol, a preservative that allows a refrigerated vial to be accessed more than once; plain sterile water is intended for single access. The difference is explained in bacteriostatic water explained.

    Work it out with the reta calculator

    Our peptide calculator opens pre-set for a 10 mg vial with 2 mL of water and marks 0.5 mg at 10 units on a syringe diagram. Change the vial size, water volume, mass or syringe and it recalculates, including for the 30 mg vial. The 20 mg preset shows 1 mg at 20 units on 4 mL of water.

    Products: Reta (GLP-3) 10 mg, 20 mg and 30 mg and bacteriostatic water.

    How much bacteriostatic water for 10 mg retatrutide (reta)?

    A 10 mg reta vial is commonly reconstituted with 2 mL of bacteriostatic water, which gives 5 mg/mL; 1 mL gives 10 mg/mL, 3 mL gives 3.33 mg/mL and 5 mL gives 2 mg/mL. At 5 mg/mL each 0.1 mL of solution contains 0.5 mg, and the table shows the same figure for each volume.

    Water addedConcentrationAmount in 0.1 mL (10 units on a U-100 syringe)
    1 mL10 mg/mL1 mg
    2 mL5 mg/mL0.5 mg
    3 mL3.33 mg/mL0.33 mg
    5 mL2 mg/mL0.2 mg

    For any other volume, the reta calculator on this page works out the concentration.

    How much bacteriostatic water for 20 mg reta?

    A 20 mg reta vial is commonly reconstituted with 2 mL of bacteriostatic water, which gives 10 mg/mL; 1 mL gives 20 mg/mL, 3 mL gives 6.67 mg/mL and 4 mL gives 5 mg/mL. At 10 mg/mL each 0.1 mL of solution contains 1 mg, and the table shows the same figure for each volume.

    Water addedConcentrationAmount in 0.1 mL (10 units on a U-100 syringe)
    1 mL20 mg/mL2 mg
    2 mL10 mg/mL1 mg
    3 mL6.67 mg/mL0.67 mg
    4 mL5 mg/mL0.5 mg

    For any other volume, the reta calculator on this page works out the concentration.

    How much bacteriostatic water for 30 mg reta?

    A 30 mg reta vial is commonly reconstituted with 3 mL of bacteriostatic water, which gives 10 mg/mL; 2 mL gives 15 mg/mL and 5 mL gives 6 mg/mL. At 10 mg/mL each 0.1 mL of solution contains 1 mg, the same concentration as a 20 mg vial with 2 mL.

    Water addedConcentrationAmount in 0.1 mL (10 units on a U-100 syringe)
    2 mL15 mg/mL1.5 mg
    3 mL10 mg/mL1 mg
    5 mL6 mg/mL0.6 mg

    For any other volume, the reta calculator on this page works out the concentration.

    Frequently asked questions

    How much BAC water goes in a 10 mg reta vial?

    There is no single correct volume. With 2 mL of bacteriostatic water a 10 mg reta vial gives 5 mg/mL; with 1 mL it gives 10 mg/mL. Adding more water does not change the quantity in the vial, it spreads it through a larger volume, so write the concentration you chose on the vial.

    How much BAC water goes in a 20 mg or 30 mg reta vial?

    A 20 mg vial gives 10 mg/mL with 2 mL and 5 mg/mL with 4 mL. A 30 mg vial gives 15 mg/mL with 2 mL and 10 mg/mL with 3 mL. Check that the vial has headspace for the volume before choosing a larger one.

    How many units on a U-100 syringe contain 1 mg of reta at 5 mg/mL?

    At 5 mg/mL (a 10 mg vial with 2 mL of water), the volume that contains 1 mg is 1 divided by 5, which is 0.2 mL, or 20 units. Units are millilitres multiplied by 100, so 0.1 mL is 10 units. The amounts on this page illustrate the arithmetic only.

    What should reconstituted reta look like?

    A clear, colourless solution. Cloudiness, strands or a gel that will not disperse usually mean the water went in too fast or the vial was shaken; haze that appears later points to warm or bright storage.

    Can sterile water be used instead of BAC water for reta?

    Only for a vial that will be accessed once. Bacteriostatic water is sterile water with 0.9% benzyl alcohol, a preservative that allows a refrigerated vial to be accessed more than once; plain sterile water is intended for single access.

    How should a reconstituted reta vial be stored?

    Refrigerated at 2 to 8 °C, protected from light and labelled with the date and the concentration. Unopened lyophilised vials are kept cold and dark until they are needed.

    How much BAC water for a 10 mg reta vial?

    A 10 mg reta vial is commonly reconstituted with 2 mL of bacteriostatic water, which gives 5 mg/mL; 1 mL gives 10 mg/mL. At 5 mg/mL each 0.1 mL (10 units on a U-100 syringe) contains 0.5 mg.

    How much BAC water for a 20 mg reta vial?

    A 20 mg reta vial is commonly reconstituted with 2 mL of bacteriostatic water, which gives 10 mg/mL; 4 mL gives 5 mg/mL. At 10 mg/mL each 0.1 mL (10 units on a U-100 syringe) contains 1 mg.

    How much BAC water for a 30 mg reta vial?

    A 30 mg reta vial is commonly reconstituted with 3 mL of bacteriostatic water, which gives 10 mg/mL; 2 mL gives 15 mg/mL. At 10 mg/mL each 0.1 mL (10 units on a U-100 syringe) contains 1 mg.

    More on this: how to store research peptides and where to get bacteriostatic water in Canada.

    All products supplied by Vistara Labs are intended for laboratory research use only. They are not drugs, are not approved for human or veterinary use, and are not intended to diagnose, treat, cure or prevent any condition. Nothing on this page constitutes medical advice or guidance for use in humans.

    References

    Retatrutide has been evaluated in randomised, placebo-controlled human trials through phase 3.

    1. Triple-Hormone-Receptor Agonist Retatrutide for Obesity - A Phase 2 TrialJastreboff AM et al. · N Engl J Med 2023 · PMID 37366315Randomised, double-blind, placebo-controlled phase 2 obesity trial, 48 weeks.
    2. Retatrutide, a GIP, GLP-1 and glucagon receptor agonist, for people with type 2 diabetes: a randomised, double-blind, placebo and active-controlled, parallel-group, phase 2 trial conducted in the USARosenstock J et al. · Lancet 2023 · PMID 37385280Randomised, double-blind, placebo- and active-controlled phase 2 trial; 281 participants with type 2 diabetes.
    3. Triple hormone receptor agonist retatrutide for metabolic dysfunction-associated steatotic liver disease: a randomized phase 2a trialSanyal AJ et al. · Nat Med 2024 · PMID 38858523Randomised phase 2a substudy; 98 participants with metabolic dysfunction-associated steatotic liver disease.
    4. Efficacy and safety of retatrutide, a GIP, GLP-1, and glucagon receptor agonist, in people with type 2 diabetes and inadequate glycaemic control with diet and exercise: a double-blind, randomised, phase 3 trialBajaj HS et al. · Lancet 2026 · PMID 42250575Double-blind randomised phase 3 trial in type 2 diabetes.

    Links open the study record on PubMed so the source can be checked directly. Listing a study is not a claim that its findings apply to any other use, product or route of administration. Research use only.

    Similar Posts